Cutting tools are generally made from hardened base metals, such as hardened tool steel or tungsten carbide, and are coated for additional hardness and wear resistance. Thickness of these coatings must be controlled to provide the tool life as promoted by the manufacturer. Besides the typical standards listed below, we also provide titanium nitride & carbide coating standards and nickel diamond coatings on requests.
Cr (Chromium) Foils | |||
|---|---|---|---|
Part No. |
μin |
μm | |
| SCR2 | 2 | 0.05 | Request for Quotation |
| SCR4 | 4 | 0.10 | Request for Quotation |
| SCR10 | 10 | 0.25 | Request for Quotation |
| SCR20 | 20 | 0.50 | Request for Quotation |
| SCR40 | 40 | 1.0 | Request for Quotation |
| SCR80 | 80 | 2.0 | Request for Quotation |
| SCR200 | 200 | 5.0 | Request for Quotation |
| SCR400 | 400 | 10 | Request for Quotation |
| SCR500 | 500 | 12.5 | Request for Quotation |
Could not find your specification? We also make customized Standards
Ni (Nickel) |
|||
|---|---|---|---|
Part No. |
μin |
μm | |
| SNI2 | 2 | 0.05 | Request for Quotation |
| SNI4 | 4 | 0.10 | Request for Quotation |
| SNI10 | 10 | 0.25 | Request for Quotation |
| SNI20 | 20 | 0.50 | Request for Quotation |
| SNI30 | 30 | 0.75 | Request for Quotation |
| SNI40 | 40 | 1.0 | Request for Quotation |
| SNI50 | 50 | 1.25 | Request for Quotation |
| SNI60 | 60 | 1.5 | Request for Quotation |
| SNI80 | 80 | 2.0 | Request for Quotation |
| SNI100 | 100 | 2.5 | Request for Quotation |
| SNI120 | 120 | 3.0 | Request for Quotation |
| SNI150 | 150 | 3.75 | Request for Quotation |
| SNI200 | 200 | 5.0 | Request for Quotation |
| SNI250 | 250 | 6.25 | Request for Quotation |
| SNI320 | 320 | 8.0 | Request for Quotation |
| SNI400 | 400 | 10 | Request for Quotation |
| SNI500 | 500 | 12.5 | Request for Quotation |
| SNI600 | 600 | 15 | Request for Quotation |
| SNI700 | 700 | 17.5 | Request for Quotation |
| SNI800 | 800 | 20 | Request for Quotation |
| SNI900 | 900 | 22.5 | Request for Quotation |
| SNI1000 | 1000 | 25 | Request for Quotation |
| SNI1200 | 1200 | 30 | Request for Quotation |
Could not find your specification? We also make customized Standards
Cr/Fe (Chromium/Iron) |
|||
|---|---|---|---|
Part No. |
μin |
μm |
Availability |
| SCR80FE999 | 80 | 2 | Request for Quotation |
| SCR150FE999 | 150 | 3.75 | Request for Quotation |
| SCR600FE999 | 500 | 12.5 | Request for Quotation |
| SCR600FE999 | 600 | 15 | Request for Quotation |
| SCR800FE999 | 800 | 20 | Request for Quotation |
|
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order. |
|||
Could not find your specification? We also make customized Standards
Ni-P (Electroless Nickel) foils (%P Non-Certified) |
Nominal Thickness |
Nominal Composition |
Availability |
||
|---|---|---|---|---|---|
Part No. |
μin |
μm |
%P |
%Ni |
|
| SNIP100-96 | 100 | 2.5 | 4 | 96 | Request for Quotation |
| SNIP200-96 | 200 | 5 | 4 | 96 | Request for Quotation |
| SNIP300-96 | 300 | 7.5 | 4 | 96 | Request for Quotation |
| SNIP400-96 | 500 | 10 | 4 | 96 | Request for Quotation |
| SNIP500-96 | 500 | 12.5 | 4 | 96 | Request for Quotation |
| SNIP600-96 | 600 | 15 | 4 | 96 | Request for Quotation |
| SNIP800-96 | 800 | 20 | 4 | 96 | Request for Quotation |
| SNIP50-92 | 50 | 1.3 | 8 | 92 | Request for Quotation |
| SNIP100-92 | 100 | 2.5 | 8 | 92 | Request for Quotation |
| SNIP200-92 | 200 | 5.0 | 8 | 92 | Request for Quotation |
| SNIP300-92 | 300 | 7.5 | 8 | 92 | Request for Quotation |
| SNIP400-92 | 400 | 10 | 8 | 92 | Request for Quotation |
| SNIP500-92 | 500 | 12.5 | 8 | 92 | Request for Quotation |
| SNIP600-92 | 600 | 15 | 8 | 92 | Request for Quotation |
| SNIP700-92 | 700 | 17.5 | 8 | 92 | Request for Quotation |
| SNIP800-92 | 800 | 20 | 8 | 92 | Request for Quotation |
| SNIP1000-92 | 1000 | 25 | 8 | 92 | Request for Quotation |
| SNIP100-88 | 100 | 2.5 | 12 | 88 | Request for Quotation |
| SNIP200-88 | 200 | 5 | 12 | 88 | Request for Quotation |
| SNIP300-88 | 300 | 7.5 | 12 | 88 | Request for Quotation |
| SNIP400-88 | 400 | 10 | 12 | 88 | Request for Quotation |
| SNIP500-88 | 500 | 12.5 | 12 | 88 | Request for Quotation |
| SNIP600-88 | 600 | 15 | 12 | 88 | Request for Quotation |
| SNIP800-88 | 800 | 20 | 12 | 88 | Request for Quotation |
|
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order. |
|||||
Could not find your specification? We also make customized Standards
Ni-P/Fe (Electroless Nickel/Iron) Non-Certified Phosphorus |
Nominal Thickness |
Nominal Composition |
Availability |
||
|---|---|---|---|---|---|
Part No. |
μin |
μm |
%P |
%Ni |
|
| SNIP100-96FE999 | 100 | 2.5 | 4 | 96 | Request for Quotation |
| SNIP200-96FE999 | 200 | 5 | 4 | 96 | Request for Quotation |
| SNIP300-96FE999 | 300 | 7.5 | 4 | 96 | Request for Quotation |
| SNIP400-96FE999 | 400 | 10 | 4 | 96 | Request for Quotation |
| SNIP500-96FE999 | 500 | 12.5 | 4 | 96 | Request for Quotation |
| SNIP700-96FE999 | 700 | 17.5 | 4 | 96 | Request for Quotation |
| SNIP100-92FE999 | 100 | 2.5 | 8 | 92 | Request for Quotation |
| SNIP200-92FE999 | 200 | 5 | 8 | 92 | Request for Quotation |
| SNIP300-92FE999 | 300 | 7.5 | 8 | 92 | Request for Quotation |
| SNIP400-92FE999 | 400 | 10 | 8 | 92 | Request for Quotation |
| SNIP500-92FE999 | 500 | 12.5 | 8 | 92 | Request for Quotation |
| SNIP700-92FE999 | 700 | 17.5 | 8 | 92 | Request for Quotation |
| SNIP800-92FE999 | 700 | 17.5 | 8 | 92 | Request for Quotation |
| SNIP1000-92FE999 | 1000 | 25 | 8 | 92 | Request for Quotation |
| SNIP100-88FE999 | 100 | 2.5 | 12 | 88 | Request for Quotation |
| SNIP200-88FE999 | 200 | 5 | 12 | 88 | Request for Quotation |
| SNIP300-88FE999 | 300 | 7.5 | 12 | 88 | Request for Quotation |
| SNIP400-88FE999 | 400 | 10 | 12 | 88 | Request for Quotation |
| SNIP500-88FE999 | 500 | 12.5 | 12 | 88 | Request for Quotation |
| SNIP700-88FE999 | 700 | 17.5 | 12 | 88 | Request for Quotation |
|
Notes:- 1. For thicknesses <= 1 micron (40 μin), allowable thickness deviation of delivered standard is ±10%. 2. For thicknesses > 1 micron (40 μin), allowable layer thickness deviation of delivered standard is ±15%. 3. Uniformity: 5%. 4. Certified Thickness Uncertainty (95% confidence interval) ±5%. Definition: a. Definition of uniformity is: (max thickness – min thickness) / average Expressed as a percent where thickness may be determined anywhere on the exposed surface of the standard. b. Above specifications prevail unless otherwise stated in a quotation. c. “In Stock” indicates delivery is 1 – 2 weeks after placement of the order. |
|||||
Could not find your specification? We also make customized Standards
Copyright © 2021 Calmetricsinc. All rights reserved.
calmetricsinc.us
info@calmetrics.in
